Teejet CenterLine User Guide v2.02 Manuel d'utilisateur télécharger pdf (Page 24)

20 Chapter 2 - Setup

Table 2-13: System Settings

Unit

System units allow the selection of either U.S. or Metric units of measurement. To change the sys-

tem units, navigate to <SYSTEM> and press the Enter button. Use the Arrow buttons to navigate to

<UNIT> and press the Enter button. Options are either US or Metric. Select the appropriate option

and press the Enter button to save the setting and progress to the <LANGUAGE> menu.

Figure 2-29: Unit selection

Table 2-14: Unit Setting

Language

CenterLine is pre-loaded with several language options. To change the system language, navigate

to <SYSTEM> and press the Enter button. Use the Arrow buttons to navigate to <LANGUAGE> and

press the Enter button. Toggle through the language options using the Arrow buttons and press the

Enter button to save the setting and return to the <SETUP> menu.

Setting Default Value Change Upon Startup

Unit US Optional

Language English Optional

Setting Description

US All units are entered and displayed in feet, miles, and acres. This is the default setting.

Metric All units are entered and displayed in meters, kilometers, and hectares.

Unit

Metric

Arrow buttons

Enter button

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 46 47

Pas de commentaire

Teejet CenterLine User Guide v2.02 Manuel d'utilisateur Page 24