Teejet CenterLine User Guide v2.02 Manuel d'utilisateur télécharger pdf (Page 13)

CenterLine 2.02

98-05054 R6

Figure 2-5: Swath Manager 5 Setup

Table 2-2: Swath Manager Settings

% Overlap

%Overlap determines the amount of overlap allowance to eliminate skips in application. Enter the

appropriate pattern by using the Arrow buttons to select 0%, 50%, or 100% and press the

Enter button to accept the setting.

Figure 2-6: % Overlap Settings

Figure 2-7: % Overlap Illustration

Setting Description

% Overlap Boom sections are activated and deactivated based on the percentage of boom overlap

setting (0%, 50%, and 100%)

Sections The number of sections (1-5) active on the system.

Width 1-5 The width for each boom 1-5.

Delay The delay in seconds to turn the booms on and off when entering/exiting applied zones.

Setup Swath Man

Guidance

% Overlap

50%

100%

Arrow buttons

Enter button

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 46 47

Pas de commentaire

Teejet CenterLine User Guide v2.02 Manuel d'utilisateur Page 13