Teejet CenterLine User Guide v2.02 Manuel d'utilisateur télécharger pdf (Page 20)

16 Chapter 2 - Setup

Table 2-8: Lightbar Menu Settings

Spacing

The Spacing setting allows the selection of the distance that a single light on the lightbar LED repre-

sents. To change the spacing setting, navigate to <LIGHTBAR>, use the Arrow buttons until <SPAC-

ING> is displayed and press the Enter button. Use the Up Arrow button to increase distance; use the

Down Arrow button to decrease distance. Press the Enter button once the appropriate distance is

displayed to save the settings and return to the Lightbar setup menu. The spacing range is 0.5 feet

to 9.5 feet in 0.1 foot increments.

Figure 2-23: Establishing Spacing Distance

Mode

The Mode setting defines how the row of LEDs are interpreted. The center stack of LEDs can repre-

sent either the current guideline or the vehicle. To change the Mode setting, navigate to <LIGHT-

BAR>, use the Arrow buttons until <MODE> is displayed and press the Enter button. Options

include <VEHICLE> and <SWATH>. Use the Arrow buttons to select the appropriate option and

press the Enter button to save the setting and return to the Lightbar setup menu.

Figure 2-24: Establishing Mode

Setting Default Value Change at Startup

Spacing 1.5 feet Optional

Mode Swath Optional

Text 1 X-Track Error Optional

Text 2 Applied Area Optional

Steer Bar No Optional

1.5

Spacing

Vehicle

Mode

Swath

Arrow buttons

Enter button

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 46 47

Pas de commentaire

Teejet CenterLine User Guide v2.02 Manuel d'utilisateur Page 20