Teejet CenterLine User Guide v2.02 Manuel d'utilisateur télécharger pdf (Page 22)

18 Chapter 2 - Setup

Table 2-10: Text 1 Settings

Text 2

To select the Text 2 setting, navigate to <LIGHTBAR>, use the Arrow buttons until <TEXT 2> is dis-

played and press the Enter button. Scroll through the available options using the Arrow buttons until

the desired message is located. Press the Enter button to save the setting and advance to the

<STEER BAR> menu item.

Figure 2-26: Selecting Text 2 Message

Table 2-11: Text 2 Settings

Message Description

X-Track Displays the error (in distance) between the current guideline and the vehicle position.

Swath # Displays the current guideline number.

Ground Speed Displays the vehicle ground speed.

Area Applied Displays the amount of area covered, sprayed, or spread in acres or hectares.

COG Course on Ground, displays the vehicle heading in degrees.

Off When OFF is selected, no message is displayed in the message slot.

Message Description

X-Track Displays the error (in distance) between the current guideline and the vehicle position.

Swath # Displays the current guideline number.

Ground Speed Displays the vehicle ground speed.

Area Applied Displays the amount of area covered, sprayed, or spread in acres or hectares.

COG Course on Ground, displays the vehicle heading in degrees.

Off When OFF is selected, no message is displayed in the message slot.

X-Track

Text 2

Swath#

Speed

Area

Course

Off

Arrow buttons

Enter button

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 46 47

Pas de commentaire

Teejet CenterLine User Guide v2.02 Manuel d'utilisateur Page 22