Teejet BOOMPILOT JOB COMPUTER Manuel d'utilisateur télécharger pdf (Page 18)

www.teejet.com

ISOBUS Job Computer : BoomPilot

OVERVIEW SETUP APPENDIXGETTING STARTED OPERATION

Machine Setup

Figure 3-7: Machine Setup

Machine Setup establishes the delay off and delay on

time; front or back implement mounting position; and

distance from the boom and the antenna to the mounting

point.

Delay Off

Delay Off functions as a “look ahead” for establishing the

timing for the boom section valves to switch off exactly

when entering an area that has been applied. If the

boom turns off too soon when entering an applied area,

decrease the Delay Off setting. If the boom turns off too

late when entering an applied area, increase the Delay Off

setting. Range is 0.0 - 10.0 seconds.

• To select the delay off time, use the number pad or

slide bar.

Delay On

Delay On functions as a “look ahead” for establishing the timing for the boom section valves to switch on exactly

when entering an area that has not been applied. If the boom turns on too soon when entering a non-applied area,

decrease the Delay On setting. If the boom turns on too late when entering a non-applied area, increase the Delay

On setting. Range is 0.0 - 10.0 seconds.

• To select the delay on time, use the number pad or slide bar.

Front or Back Mounted Implement

Direction to Boom sets whether the boom is located behind or in front of the GPS antenna as the vehicle moves in

a forward direction.

• To select the mounting placement, select an option from the drop down menu or use the UP/DOWN

ARROWS to highlight the option.

Figure 3-8: Distance to Mount Point

Boom

Hitch/Mount Point

GPS Antenna

Distance from Boom to Mount Point

Distance to Boom denes the distance from the hitch or mount point to

the boom. Range is 0.00 - 50.00 feet / 0.00 - 50.00 meters.

• To select the distance, use the number pad or slide bar.

Distance from Antenna to Mount Point

Distance from Antenna denes the distance from the hitch or mount

point to the antenna. The antenna should be behind the mount point

(machine mounting is set in OEM options). Range is 0.00 - 65.61 feet /

0.00 - 200.00 meters.

• To select the distance, use the number pad or slide bar.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Teejet BOOMPILOT JOB COMPUTER Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Ordinateurs Teejet BOOMPILOT JOB COMPUTER