Teejet UniPilot Manuel d'utilisateur télécharger pdf (Page 17)

98-05226-ENUS R4

UniPilot

Replacement of Contact Wheel

Figure 1-20: Unscrew Cover

Figure 1-21: Remove Top Cover

Figure 1-22: Contact Wheel With Holding Pins

The contact wheel is a wear part and has to be replaced when worn.

To replace the contact wheel:

1. Put the UniPilot ESM in the standby position.

2. Unscrew the cover mounting screw with a 3 mm allen wrench.

3. Remove the cover from the contact wheel.

4. Pull the wheel from the 4 holding pins.

5. Slip the new contact wheel onto the four holding bolts and press it down.

6. Replace the cover and hand tighten the holding screw.

1 2 ... 12 13 14 15 16 17 18 19 20

Pas de commentaire

Teejet UniPilot Manuel d'utilisateur Page 17