Teejet LH 1200S Manuel d'utilisateur télécharger pdf (Page 15)

LH 1200S O

PERATORS MANUAL

LH A

GRO 15

SECONDARY FUNCTIONS, SEED DRILL

Exactly the same functions can be achieved for seed drills as described above for

fertiliser distributors. The functions require the same sensors and the same keys

are used.

SOW AXLE RPM

Encoding a flow figure of 9999 alters the program in the LH 1200S allowing it to

display RPM. RPM is displayed by pressing the L/Ha. key.

ENCODE:

Press the shown keys in this order.

Key Function

RPM

NOTE! The L/MIN key and the L key cannot be used when this

encodement is used.

SEED RATE MONITORING

It is possible to meter the “flow” of seed using a special sensor, which gives a

suitable number of pulses per revolution. The calibration figure is determined

during the normal calibration procedure for the seed drill.

By encoding the calibration figure as a flow figure, the following functions are

available:

ENCODE:

XXXX is the determined calibration figure in

grams with 2 decimals. Thus, a calibration

figure of 15.00 is encoded as 1500. The

displayed seed rate will be in Kg.

Key Function

SEED RATE

SEED CONSUMPTION PER MINUTE

TOTAL SEED CONSUMPTION

NOTE! It is a condition for the above functions that the sensor is correctly

calibrated. A new calibration must take place if the spreader settings

are altered.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Pas de commentaire

Teejet LH 1200S Manuel d'utilisateur Page 15