Teejet SENTRY 6510 Manuel d'utilisateur télécharger pdf (Page 8)

www.teejet.com

Sentry 6510 Capacity Monitor

Mounting the wheel sensor

Mount the wheel sensor to the frame on the inside one of the steering wheels.

Mount the magnet to the wheel hub or rim using the 20 mm support collar.

1. Screw or weld the sensor bracket.

2. Place the sensor in the bracket.

3. Turn the wheel and ensure that the distance between the sensor and the magnet is 5-8 mm.

Figure 4: Wheel sensor and magnet placement

4. Put the sensor cable to the junction box and connect to the circuit board as shown in Figure 2.

5. Use cable ties to x the cable so it will not be pinched or worn during operation.

5-8 mm

Magnet can be painted

Washer

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Pas de commentaire

Teejet SENTRY 6510 Manuel d'utilisateur Page 8