Teejet IC18 SPREADER JOB COMPUTER Manuel d'utilisateur télécharger pdf (Page 32)

98-05173 R1 US

ISOBUS Job Computer : IC18 Spreader NA

OVERVIEWSETUPAPPENDIX GETTING STARTEDOPERATION

OEM

The OEM setup menu is password protected and the settings in this menu are directly related to the tted OEM

equipment. To obtain an access code, contact your local dealer or TeeJet Technologies Customer Service.

To access the OEM screens:

Figure 3-26: Machine to OEM

Figure 3-27: OEM Unlock

1. From the Main Setup Screen , select MACHINE.

2. Select OEM.

3. Select the Access Code Entry Box to the right of the

menu option.

4. Use the number pad or slide bar to enter the access

code.

5. Select the ACCEPT KEY to complete the unlock

process

6. Select from:

►Sensors – used to establish the parameters for

Spinner RPM, Spinner RPM Revolution, Hydraulic

Motor RPM Revolution, and Weighing systems

►Actuators – used to select the type of valve used to

control the spreader belt

►Bed Size – used to establish the maximum load

capacity of the spreader

►User Interface (VT) – used to establishes the

displayed tolerance for application rate

►Regulator Conguration – used to establish:

◄ Regulator Test – used to verify the regulation

control matches theory and actual settings.

◄ Valve Conguration – sets the control settings

for the regulation valve.

◄ PID Parameters – sets the course and ne

adjustments of the regulation valve.

►Calibration RPM – used to program the desired

roller RPM, the bed chain speed, used during the

calibration process

►Program Modes – used to designate various

options that impact system functions including

program style, calibration type, ow factor, step

persentage and fast empty

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 46 47

Pas de commentaire

Teejet IC18 SPREADER JOB COMPUTER Manuel d'utilisateur Page 32